Protect travertine from pool splash and summer sun
Travertine Sealing in Highlands, FL
A free travertine sealing estimate for your Highlands pool deck or lanai starts with a call to (904) 479-2177.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals travertine near me in Highlands?
Highlands homes with travertine can book a local stone sealing contractor, and a reply comes within 1 business day, usually much sooner. The visit and the written price are free, and nothing obliges you to book. To start, call (904) 479-2177.
Travertine is a natural stone, so it behaves unlike the concrete pavers on a neighbor's driveway. It drinks water, oil and pool chemicals through tiny holes in its surface, then shows the damage as dark patches and stubborn marks. A sealer chosen for stone slows that down and keeps the cream and gold tones from going dingy. To talk through your pool deck, ask for a free estimate.
Why is travertine harder to protect than concrete pavers?
A Northeast Florida stone care company scores travertine 8 out of 10 for thirst, meaning it soaks up liquid easily, and 4 out of 10 for slip risk. It calls travertine the pool deck favorite because the stone stays cooler underfoot than many surfaces. The same open pores that make it comfortable let a spilled drink or a splash of chlorinated water in.
Another company that handles stone in Northeast Florida says that water, oils and grime can soak in and leave darkened areas that ordinary cleaners cannot lift. Worn or etched stone can also look like dirt when it is not. A contractor who sees the surface up close can tell a stain from a dull patch before any product goes on. To arrange that look, call (904) 479-2177.
Concrete pavers hold their color in the paver itself and take a film coat well. Travertine does better with a coat that soaks in. That difference is why a quote for concrete pavers cannot be copied over to a stone pool deck. Share what the deck is made of when you ask for a free estimate.
Which sealer should go on a Highlands travertine deck?
Two stone companies in Northeast Florida land on the same answer: a breathable penetrating sealer. It soaks into the stone instead of sitting on top, so it does not peel, flake or cloud the way a surface film can, and the stone keeps its natural look. One adds that a film coat on outdoor stone can trap moisture, turn cloudy and get slippery. Ask the contractor to name the product before you ask for a free estimate.
Unilock, which makes pavers, warns that high gloss sealers can be slippery when wet. A pool deck is wet most of the summer, so the finish matters for feet as much as for looks. A penetrating product leaves the surface as grippy as it was, and that is why stone specialists reach for it around water.
How do I know the sealer on my travertine has worn out?
A water drop shows it. A Florida restoration company puts a coin sized puddle on several spots and waits 10 to 15 minutes. If the water beads and the stone keeps its color, the sealer is working. If the stone darkens, the sealer is gone in that spot, and the busiest areas near the steps and pool edge usually go first. Ask the contractor to run that check at the visit, or call (904) 479-2177.
Another Northeast Florida stone company uses the same splash test on its jobs. Fading in the corners, dark rings where drinks sat and a damp look after rinsing are all hints that the stone is drinking water again.
How often does Highlands travertine need to be resealed?
Outdoors, plan on about once a year, sometimes more, says a Florida restoration company, because UV light breaks sealer down, summer rain keeps stone wet and pool chemicals add wear. Two Northeast Florida stone companies give one to three years for stone in general, and one says pool deck stone and busy walks need it sooner than a covered patio. A Highlands deck in full afternoon sun, where July highs average about 92 degrees, sits at the short end. To schedule an inspection, call (904) 479-2177.
A covered lanai floor beyond the splash zone can stretch longer. The honest answer comes from the water drop test, which tells you more than the calendar. If you are unsure which category your stone falls in, ask for a free estimate.
What does travertine sealing cost in Highlands?
No page found for Northeast Florida lists a per square foot rate for travertine alone, so the table below is built from three published pieces. One regional washing company posts $1.75 to $3.25 for each square foot of the full clean, sand and seal. A different Northeast Florida company lists paver cleaning from $0.22 per square foot. A third company's calculator adds a flat $200 for natural stone. Your price comes from a written quote after a contractor sees the stone, so ask for a free estimate.
| Stone area | Typical example | Wash only, from $0.22 | Clean, sand and seal | With the $200 stone add-on |
|---|---|---|---|---|
| 300 sq ft | Lanai floor | $66 | $525 to $975 | $725 to $1,175 |
| 600 sq ft | Pool deck | $132 | $1,050 to $1,950 | $1,250 to $2,150 |
| 1,000 sq ft | Deck and entry walk | $220 | $1,750 to $3,250 | $1,950 to $3,450 |
The wash column multiplies $0.22 by the area. The next column multiplies $1.75 and $3.25. The last adds $200 to both ends. Penetrating stone sealer pricing is not published, so treat these as a planning range, not a quote.
What is the process before sealer goes on travertine?
One Northeast Florida stone company lists four steps: identify the stone and its condition, wash it with pH neutral products at low pressure, let it dry fully and then apply a penetrating sealer made for natural stone. Another says to fill open pits and pinholes with color matched material before sealing, and to give the sealer time to cure afterward. To see how that fits your lanai, call (904) 479-2177.
Order matters because sealing over dirt locks the dirt in, a point a Florida restoration company makes about stone floors. Outdoor stone also needs a day or more to dry after rain, and Unilock asks for 24 to 48 hours of clear weather before and after sealing on pavers. Highlands summers rarely give that, so a patient schedule beats a rushed one. To pick a window, ask for a free estimate.
Will acids, vinegar or harsh cleaners hurt my travertine?
Yes. A stone care company warns that vinegar and acid cleaners etch travertine and leave dull spots, and another says acidic products also wear down the sealer. Sealer does not prevent etching, which is why a spilled citrus drink can leave a pale mark even on sealed stone. Polishing or honing removes etch marks, and that is stone refinishing, a separate job from sealing. Ask any contractor which products touch your deck, then ask for a free estimate.
Which areas of a Highlands home use travertine?
Around the Highlands area, where about 73 percent of housing units are single-family homes, travertine tends to show up in a few places. Each wears differently, so each earns its own plan. Call (904) 479-2177 to talk about the area that worries you most.
Pool deck
Chlorine, splash and bare feet hit the surface all summer. Plan on the shortest reseal span here.
Screened lanai floor
The screen cuts some sun, yet humid air keeps the stone damp longer and invites mildew in the joints.
Entry steps and walks
Dirt tracked in by shoes and drips from potted plants darken the stone near the front door.
Outdoor kitchen and bar counter
Oil and sauce splashes soak in fast, so these spots are worth protecting before the first cookout.
Want a price on sealing your Highlands travertine?
Use the short form or phone, and a stone contractor writes back inside 1 business day, usually quicker.
Free, no obligation
What do sealed stone and paver surfaces look like around Highlands?
Which Highlands neighborhoods and nearby towns can request travertine sealing?
Homes across Highlands and every town below can ask for a free stone sealing price. The list covers Duval County and reaches into neighboring counties. If your street is missing, call (904) 479-2177.
What do Highlands homeowners ask about sealing travertine?
How much does it cost to seal travertine?
No page found for Northeast Florida lists a rate for travertine alone. Pieces that do exist: $1.75 to $3.25 per square foot to clean, sand and seal, and a flat natural stone add-on of $200 in one company's calculator. A 600 square foot lanai and pool deck would land near $1,250 to $2,150 on that math.
Is it recommended to seal travertine?
Yes for outdoor stone. A Northeast Florida stone care company calls travertine thirsty, rating its absorbency 8 out of 10, and says water, oils and grime soak into its natural holes. Sealer slows that, though it does not stop acid from etching the surface.
How often should travertine be sealed?
Outdoors, a Florida restoration company says about once a year, sometimes more, because UV light and pool chemicals wear sealer down. Two Northeast Florida stone companies give one to three years for stone in general. A shaded, covered patio can sit at the long end.
Which sealer works on travertine?
A breathable penetrating sealer made for natural stone. Stone care companies in the region favor it because it soaks in, leaves no surface film to peel or turn cloudy and keeps the stone from getting glossy. Ask for the product name in the written quote.
Is it good to seal pavers in Florida?
For most pavers, yes. Unilock, a paver maker, says sealer helps resist fading and staining in strong sun and makes a patio easier to wash. It is a repeat cost, and travertine follows its own stone rules rather than the concrete paver ones.
Can you use Clorox wipes on travertine?
A disinfecting wipe is not a stone product. Travertine is easily etched by acids, and a stone care company warns that acidic cleaners leave dull spots and wear sealer thin. A contractor uses pH neutral products on stone, so ask what goes on the surface.
How do I maintain sealed travertine around the pool?
Rinse chlorine and salt splash off, sweep leaves before they stain and book a stone safe wash on a schedule. A Northeast Florida company washes stone at low pressure with pH neutral products. Heavy scrubbing with harsh cleaners shortens the life of the sealer.
How long does a travertine sealing visit take in Highlands?
Most residential jobs finish in one visit, according to a Northeast Florida stone company, though a large pool deck takes longer. Outdoor stone also has to dry fully first, which can add a day or more after rain. Ask about drying time when the date is set.
Will sealing make my travertine slippery or glossy?
A penetrating sealer should not. It soaks in, so the stone keeps its natural look and grip. Unilock warns that high gloss film sealers can turn slippery when wet, which is why surface coatings rarely suit a pool deck.
Does summer rain in Highlands change when travertine can be sealed?
Yes. The area gets about 52 inches of rain a year, mostly from May through September, and wet stone has to dry before sealer goes on. A Northeast Florida washing company points to fall as the drier stretch, so many owners book then.
Can chips and open pits in travertine be fixed before sealing?
Often, yes. One Northeast Florida stone company fills open pits and pinholes with color matched material before it seals. Mention the pitted spots when you ask for a price so the visit allows time for them.
Other paver and stone services for Highlands homes
Ready to protect your travertine?
Ask for a free estimate and a contractor replies within 1 business day, usually much sooner.
Free, no obligation